Do the walls need to be finished before whole-house customization installation?

The walls should ideally be properly prepared before installation. You don't need to wait until all latex paint work is fully completed, but the flatness and the internal and external corners must be done first. During measurement, we will confirm wall flatness, the condition of the kickboard and the internal and external corners, and then determine the finishing method. If the wall is uneven, the gap between the cabinet body and the wall will be difficult to close later. In addition, re-measurement should be done after the water and electrical positioning is completed. If sockets, water supply and drainage, and smoke exhaust routes are not set before installation, later changes will be very troublesome. In terms of sequence, it is recommended to have the wall base in place and the water and electrical positioning completed before installing the cabinets.