Whole-house customization: designing it yourself and finding a factory to make it

Designing it yourself and then finding a factory to make it is a workable approach, but the drawings and on-site conditions need to be aligned. During measurement, wall flatness, kickboard and internal/external corner conditions will be confirmed before deciding the closing method; after the water and electrical positioning is completed, re-measurement is required, and the sink and water supply/drainage positions, gas and socket points, and the range hood exhaust path must all be confirmed in advance. For pricing, wardrobes are calculated by projected area width × height, kitchen cabinets by linear metre; the conversion between unfolded area and projected area varies with the cabinet body layout and must be calculated according to the drawings. The factory is at No. 3 Hexie Street, Fangguannanyijin Village, Gaobeidian, Hebei; you can book a visit to the factory to see processes such as cutting, edge banding, and side drilling. If you design it yourself, it is advisable to take a look at the craftsmanship first before deciding.